INSTRUCTIONS FOR CHANGING
THE SNAP PLUS™ THERAPY
CARTRIDGE
red
If the
pressure discharge indicator is visible at
the top of the cartridge, the SNAP PLUS™ Therapy
Cartridge will need to be replaced with a new
cartridge following the steps below if further
treatment with the SNAP™ Therapy System is
desired or indicated by your clinician:
1. Remove the cartridge from the patient.
2
2. Squeeze the release buttons on the tube
fitting and pull the tube fitting out of the
cartridge.
3. Insert the tube fitting into the new cartridge.
4. Push down the activation key to release and
remove the key from the new cartridge.
5. Secure cartridge to patient.
NOTE: When the SNAP™ Therapy Strap is placed
around an extremity, take care to ensure that the
strap is not placed too tightly as this may cause
discomfort or potentially decrease blood flow to the
extremity.
4
3