Basic operations
Using the control panel
1
• DAB: Select DAB service.
• DISC/USB/CD-CH: Select title/program/
playlist/folder.
• USB-iPod: Enter the main menu [Hold].
• iPod: Enter the main menu/Pause playback/
Confirm selection.
• BT-PHONE/BT-AUDIO: Select a registered
device.
2
• Turn on the power.
• Turn off the power [Hold].
• Attenuate the sound (if the power is on).
3
Display window
4
USB (Universal Serial Bus) input jack
5
• Activate/deactivate TA Standby Reception.
• Enter programme type searching mode [Hold].
6
Flip down the control panel.
• To eject the disc, flip down the control panel
0
then press
on the unit.
7
AV-IN (video) input jack
8
• TUNER: Search for station.
• DAB: Search for DAB ensemble.
• DISC/USB/USB-iPod/CD-CH/iPod: Select
chapter/track.
• BT-AUDIO: Reverse skip/forward skip.
8
9
• Volume control [Turn].
• Select the source [Press] *
=
DAB *
TUNER
2
=
USB-iPod) *
CD-CH *
2
=
=
BT-PHONE *
2
=
=
AV IN
(back to the beginning)
p
• Select/adjust the sound mode.
• Enter the PSM settings [Hold].
q
• TUNER/DAB: Select preset station/DAB service.
• DISC/USB/CD-CH: Select chapter/title/
program/folder/track/disc (for CD changer).
• BT-PHONE: Dial preset phone number *
w
• Enter functions mode.
• BT-PHONE: Activate Voice Dialing [Hold].
e
Change the display information and pattern.
r
• TUNER/DAB: Select the bands.
• DISC/USB/USB-iPod: Start/pause playback.
• BT-AUDIO: Start/pause playback.
*
1
Holding SOURCE will enter Bluetooth menu if a
Bluetooth phone is connected.
*
2
You cannot select these sources if they are not ready
or not connected.
*
3
For storing preset phone number, see page 32.
.
1
=
=
DISC *
USB *
2
2
(or
/iPod *
2
2
(or EXT IN)
=
BT-AUDIO *
2
LINE IN
3
.