Using The Standby Reception - JVC KD-DV7402 Manuel D'instructions

2
Select an ensemble (primary service).
3
Preset number "P4" appears on
the display.
Using the Preset Service List
1
Follow steps 1 and 2 of "Using the number
buttons" on page 34 and above.
5 ∞
• By holding / , the Preset Service List will
appear (go to step 4).
2
3
Display the Preset Service List.
4
Select a preset number you want to store
into.
• You can move to the lists of the other DAB bands
by pressing number button 5 (
6 ( ) repeatedly, but you cannot store
the selected service into these bands.
5
Store the service.
Preset number "P4" appears on
the display.
Listening to the preset service
using the Preset Service List
1
Display the Preset Service List, then select
the preset DAB service you want to listen to.
2
Change to the selected DAB service.

Using the standby reception

You can use three types of Standby Reception.
• Road Traffic News Standby Reception—TA Standby
Reception
• Announcement Standby Reception
• PTY Standby Reception
Activating/deactivating TA/PTY Standby
Reception
• Operations are exactly the same as explained on
pages 14 and 15 for FM RDS stations.
• You cannot store PTY codes separately for the DAB
tuner and for the FM tuner.
Announcement Standby Reception
Announcement Standby Reception allows the
unit to switch temporarily to your favorite service
(announcement type).
To activate the Announcement Standby
Reception and select the announcement type
1
) or
2
Activating the Announcement Standby
Reception.
Display the currently selected announcement type.
Continued on the next page
EXTERNAL DEVICES 35