Timed Dry Cycle - Haier RDE 350AW Manuel D'utilisation Et Instructions D'installation

TIMED DRY CYCLE

RDE/RDG 350AW
1. Turn the knob to any program except "OFF" to power on. The control panel
will beep once and the dryer will change from "OFF" to the operating status.
If Start/Pause button is not pressed five minutes after powering on, the dryer
will automatically return to OFF status.
2. Set the cycle select dial to Timed Dry Cycle.
3. There are 4 preprogrammed times to choose from 30,60,90 and 120
minutes.
4. When starting the machine close the door first, then press the start/pause
button. If a pause is needed during drying, press this button. Pressing again
will resume operation.
English
22