Ninka Qanto R1 Instructions De Montage page 7

Mounting of spacer bars for INSTALLATION POSITIONS L1 and R2
Lifting column
Lifting column
9.
Spacer bars
Qanto_Id_A4_00000.50.065050_US
L1
Control
9.
Lifting column
!
CAUTION
Select the length of the fastening screws for the
bars in such a way that they do not poke through
the cabinet, as this will damage the unit and may
lead to injury.
Step 9:
In case of a Qanto installation position of L1 or R2,
you must mount the spacer bars as shown in the
figure opposite. Pay attention to the position of the
lifting column! Select the length of the fastening
screws for the bars in such a way that they do not
poke through the cabinet!
R2
Control
EN
7