Ninka Qanto R1 Instructions De Montage page 16

Tray
Water level/straightedge
Safety switch
16
H = H
31.
32.
33.
TX20
Step 31:
Lay the tray on the tray supports and check the
heights once again. If the height still is not correct,
repeat Steps 29 and 30.
Step 32:
Lay a water level or straightedge on the tray
supports
Step 33:
Loosen the screws of the safety switch and move
the safety switch until it is flush with the water
level/straightedge. Retighten the screws.
EN
Qanto_Id_A4_00000.50.065050_US