Ninka Qanto R1 Instructions De Montage page 10

14.
Planning dimensions
Corner bar
10
Corner bar
Planning dimensions
15.
16.
Step 14:
The corner bar is not included in the scope of
supply. Create this bar. The dimensions depend
on the planning dimensions. The corner bar can
have different designs.
!
WARNING
Take care when using power tools and follow
safety guidance otherwise injury may occur
Step 15:
Pre-drill the holes to fix the corner bar
Step 16:
Screw the accompanying cabinets only to the corner bar.
Do NOT screw it to the corner cabinet.
EN
Qanto_Id_A4_00000.50.065050_US