Temperature Selection - Toshiba RBC-ASC11E Mode D'emploi

■ Run operation
1 ON/OFF button
Press the button to light up the running
indicator, and start running.
During heating
· In the case where the indoor unit fan
mode is off, the air conditioner starts
to send out hot air after preheating for
3-5 minutes.
2 Select running mode
Switch to the running mode by pressing
the menu button.
· The current running mode icon
flickers.
Press the set button each time, then the
running mode and its icons change in
the following order:
(Cooling only mode will not display:
" Auto" and "
· For the multi-connection system,
" Auto" can only be displayed and
selected on the super heat recovery
multi-connection system.
· " Dehumidify" is not available for
concealed duct high static press type.
· If the button is not operated within 30
seconds, the running mode selection
will end.
3 Select the fan speed
Switch to the fan speed mode by
pressing the menu button.
·The current fan speed icon flickers.
Heat")
Press the set button each time, then the fan
speed mode and its indication change in the
following order:
·Three-speed models:
·Five-speed models:
· The fan speed that can be set will vary
depending on the connected indoor units.
· In the fan mode, "
selected.
· These models that cannot set the fan
speed will display "
· If the button is not operated within 30
seconds, the fan speed selection will end.
4 Select the wind direction
Switch to the wind direction mode by
pressing the menu button.
·The current wind direction icon flickers.
Press the set button each time, then the
wind direction mode and its icons change in
the following order:
Operating Modes
Heat, Fan,
Auto (heating)
Cool, Dry,
Auto (cooling)
· Due to the slight difference in different
model of indoor units, please refer to the Air
Conditioner Owner's Manual for details on
setting the louver position and swing.
· If the button is not operated within 30
seconds, the wind direction selection will end.

5 Temperature selection

Press the set button to adjust the temperature.
· Temperature setting range is from 18.0°C
to 29.0°C
· The sensitivity of temperature adjustment
is 0.5°C.
-5-
Auto" cannot be
".
Available wind direction
(1) ⇔ (2) ⇔ (3) ⇔ (4) ⇔ (5)
(1) ⇔ (2) ⇔ (3)