Caractéristiques Techniques - Virutex FR129 VB Mode D'emploi

Masquer les pouces Voir aussi pour FR129 VB:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
14. ACCESSORIES
Standard templates for different hinges
Template guides for different cutter bit diameters.
2945471 90º CORNER CHISEL RC29M
15. TEMPLATE GUIDES AND CORRESPONDING
CUTTER BITS
See (Fig. 21).
16. NOISE LEVEL
The noise and vibration levels of this device have been
measured in accordance with European standard EN60745-
2-17 and EN 60745-1 and serve as a basis for comparison
with other machines with similar applications.
The indicated vibration level has been determined for the
device's main applications and may be used as an initial value
for evaluating the risk presented by exposure to vibrations.
However, vibrations may reach levels that are quite different
from the declared value under other application conditions,
with other tools or with insufficient maintenance of the
electrical device or its accessories, reaching a much higher
value as a result of the work cycle or the manner in which
the electrical device is used.
Therefore, it is necessary to establish safety measures to
protect the user from the effects of vibrations, such as
maintaining both the device and its tools in perfect con-
dition and organising the duration of work cycles (such as
operating times when the machine is subjected to loads,
and operating times when working with no-load, in effect,
not in use, as reducing the latter may have a considerable
effect upon the overall exposure value).
17. GUARANTEE
All of VIRUTEX portable tools are guaranteed for 12 months
from the date of supply, excluding any damage which is
a result of incorrect use or of natural wear and tear on
the machine.
All repairs should be carried out by the official VIRUTEX
technical assistance service.
18. RECYCLING ELECTRICAL EQUIPMENT
Never dispose of electrical equipment with domestic waste.
Recycle equipment, accessories and packaging in ways that
minimise any adverse effect on the environment. Comply
with the current regulations in your country.
Applicable in the European Union and in European
countries with selective waste collection systems:
If this symbol appears on the product or in the accompanying
information, at the end of the product's useful life it must
not be disposed of with other domestic waste.
12
In accordance with European Directive 2002/96/EC, users
may contact the establishment where they purchased the
product or the relevant local authority to find out where
and how they can take the product for environmentally
friendly and safe recycling.
VIRUTEX reserves the right to modify its products without
prior notice.
F R A N Ç A I S
FRAISEUSE DE FERRURES FR129 VB
(FIGURES EN PAGE 47)
Important
Avant d'utiliser la machine, lisez attenti-
vement ce MANUEL D'INSTRUCTIONS et la
BROCHURE D'INSTRUCTIONS GÉNÉRALES DE
SÉCURITÉ qui vous sont fournis avec cette
machine. Assurez-vous de bien avoir tout
compris avant de commencer à travailler
sur la machine.
Gardez toujours ces deux manuels
d'instructions à portée de la main pour
pouvoir les consulter, en cas de besoin.
Note importante
Veuillez lire attentivement la BROCHURE
D'INSTRUCTIONS GÉNÉRALES DE SÉCU-
RITÉ qui est jointe à la documentation de
la machine.
2. Avant de brancher la machine, vérifier si la tension
d'alimentation correspond à celle indiquée sur la plaque
des caractéristiques.
3. Toujours maintenir les mains éloignées de la zone de
coupe. Toujours fixer fermement la machine.
4. Toujours utiliser des outils d'origine VIRUTEX. Ne jamais
utiliser d'outils défectueux ou en mauvais état.
5. Toujours utiliser des fraises au diamètre de tige correct
pour la pince à utiliser et adaptées à la vitesse de l'outil.
Débrancher la machine du secteur avant de
réaliser toute opération de maintenance.
1. CARACTÉRISTIQUES TECHNIQUES
Puissance...........................................................................1.000 W
Vitesse à vide...............................................14.000-27.000/min
Diamètre pince...................................................................8 mm
Poids machine..................................................................4,3 kg
Niveau de pression acoustique continu
équivalent pondéré A...................................................86 dBA

Publicité

Table des Matières
loading

Table des Matières