REV Ritter BW 1000 PS Instructions De Montage page 12

Technical data
Rated voltage:
Rated power:
Maximum switching current:
Power consumption:
Lense type:
Adjustment range:
Working distance:
Detecting angle:
Time adjustment:
Brightness adjustment:
Temperature range:
Protective class:
Noise suppression:
Approval:
Guarantee
During manufacturing the REV movement detector is tested by several testing stands
working at the latest technical standards.
Should however a defect occur, the guarantee is given by REV under following conditions:
1. The guarantee time is 24 months from date of buying. It ends 30 months after date of
manufacturing of the appliance at latest.
2. The appliance will be repaired free of charge by REV or exchanged, if it is proofed that
the defect happened during the guarantee period due to a manufacturing or material
fault.
3. The liability does not cover transport damages as well as to damages caused by
inproper installation.
4. If within 6 months from date of a rejected claim by REV, no complain is made all claims
for defects will be expire.
5. In guarantee case please send the device together with the sales slip and short
description of defect to the dealer or to REV.
6. Without guarantee certificate repairs will be charged.
230V~, 50Hz
2300W
Halogen lamps 230V~, 750W
10 A resistive load
5 A inductive (cos phi=0,4)
1,5 W approx.
48 segments
2 passiv infrared sensor
fresnell structure
far range detecting area
20 lens segments, 350 m² area
close range detecting area
20 lens segments, 60 m² area
Undetected area:
8 segments, 0,5 - 2,5 m
+ - 40° horizontal swinging range
vertical swinging range 60°
approx. 16m, depending from temperature,
tilt angle and approaching direction
180 °
2 sec to 20 min (stepless)
2 lx. to 1000 lx. approx. (steppless)
-25° C to +55° C
IP 44 (splash-proof)
EN 55014 / EN 61000-3-2
EN 50082 / EN 61000-3-3
PRODUCT
geprüfte
S E RV I C E
Sicherheit
IP44
12