Manual Capturing; View Images Or Videos; Power Off; Advanced Operations - Braun BLACK300 Mode D'emploi

3.4.2 Manual Capturing

You can press SHOOT to manually capture photos or recording video.

3.4.3 View Images or Videos

There are two ways to view the captured images or videos:
1) CD screen on camera
L
2) TV monitors which connects to camera with TV cable
Press OK to view images, the latest image will be shown in the LCD screen on
camera or TV monitor. Press UP to view the previous image and press DOWN for the
next. The detailed operations like deleting images or videos will be described in
"Advanced Operations" chapter.

3.5 Power Off

Slide the power switch to OFF position to power off the camera. Please note that
even in the OFF mode, the camera still consumes certain power at µA level.

4. Advanced Operations

From the basic operations of the camera in previous chapter, we know that the
camera has three basic operation modes (Power switch):
1) OFF mode: Power switch is at OFF position (Right).
2) ON mode: Power switch is at ON position (Left).
3) TEST mode: Power switch is at TEST position (Middle).
In the above three modes, the OFF mode is the specified safe mode when replacing
the micro SD-card or batteries and transporting the camera.
The settings can only be customized in TEST mode and the remote control is
needed.

4.1 Settings Menu

To view the camera settings menu, press MENU in the TEST mode (called settings
menu in this chapter).The settings menu will be shown on the LCD on camera or the
external TV monitor.
8