Tristar With Meter Application; Dip Switch Set-Up; Ethernet Writes - Morningstar EMC-1 Manuel D'installation Et D'utilisation

2.3.3 TriStar with Meter Application

Refer to Figure 2-2 below for EMC−TS-M-2 cable
routing.
To
Network
RJ-45
Figure 2-2. EMC−TS-M-2 Cable Routing
TriStar PWM (or TriStar MPPT)
TS-M-2
TriStar
Jack
Meter
Jack
RJ-11
RS-232
RJ-11
RJ-11
Y-cable
7

2.4 DIP Switch Set-Up

Figure 2-3 below shows DIP switch locations and
functions:
DIP 1 ON (up)
- Enables Ethernet
Writes
Figure 2-3. DIP Switch Functions

2.4.1 Ethernet Writes

With DIP 1 ON, Ethernet writes are enabled, and
custom programs, firmware updates (to the EMC-1)
and network settings can be written to a Morningstar
Device. Though this DIP switch is a safety feature
designed to prevent unintended configuration
changes to the Morningstar Device, DIP 1 is not a
replacement for proper network security.
DIP 2 - Future Use
8