Turning the AB myPilot On or Off
Turning On
Turning Off
To turn the AB myPilot On, press and
To turn the AB myPilot Off, press and
hold the On/Off button for two seconds
hold the On/Off button for two seconds
until you see the display turn On.
until you see the display turn Off.
For optimal convenience, you can keep the AB myPilot turned on while wearing the Naída CI.
The keypad lock is a useful feature that helps avoid accidental changes of the Naída CI settings.
Keypad Lock
See the
section below for more information.
Turning off the AB myPilot when you switch off the Naída CI, will help to conserve its charge.
Keypad Lock
Auto Keypad Lock
The AB myPilot is equipped with a programmable, automatic keypad lock, which locks the keys
if the AB myPilot has not being used for more than twenty seconds. To enable this feature, refer
to the
Auto Keypad Lock
section on page 29.
Manual Keypad Lock
You may also manually activate the keypad lock via the menu.
To Lock
1
2
To lock the keypad, press the center
Scroll down using the down arrow and select
button to enter the menu screen.
Lock Keypad. The keypad will lock and the
AB myPilot will enter sleep mode. In the Direct
Control mode the manual lock is not available.
8
AB myPilot User Guide