Changing Volume - ab myPilot Mode D'emploi

The screens of the AB myPilot may look different, depending on the preferences set by the
hearing care professional.
Standard Mode
The standard mode gives the full overview, including program, sensitivity, and volume information.
Press the left or right arrow (
•
Press the up or down arrow (
•
page 15 for details.
Short press the center button to access the sub-menus.
•
Press the center button for two seconds to change to the ZoomControl screen. See page 22 for details.
•
If bilateral, when paired to both Naída CIs, all program changes made by the AB myPilot are
applied to both Naída CIs simultaneously, unless otherwise specified by the recipient.
The order of the program sequence is set by the hearing care professional during the fitting
process. For further information on hearing programs, please ask the hearing care professional.
Direct Control Mode
In the direct control mode, each key selects the indicated program number.
Programs
Short Press
2 Second Press
The program names are shown for 10 seconds after a new program is selected.
Press the up or down arrow (
•
Press the left and right buttons (
•
control mode and enter the standard mode.
The available hearing programs are set by the hearing care professional.
In the direct control mode, the screens for volume control, sensitivity control, sub-menus, and
ZoomControl are not available. Quick Access, however, is available.

Changing Volume

The Volume screen shows the volume settings, including the most comfortable level, which was
defined by the hearing care professional during the fitting process.
/ ) to scroll back and forth through the hearing programs.
/ ) to enter the volume screen. To change the volume, see
Left
1
4
/ ) to change the volume.
+ ) simultaneously for two seconds to exit the direct
Center
2
2
AB myPilot User Guide
Right
3
5
15