Program Ambiguity; Ab Mypilot Battery Status; Zoomcontrol Screen (Optional); Direct Access Of Zoomcontrol Screen - ab myPilot Mode D'emploi

Program Ambiguity

There may be situations where a bilateral recipient has a different program on each Naída CI.
For example, if the recipient changes the hearing program on one Naída CI manually using the
on-processor controls without changing the program on the other Naída CI, once re-synced,
the screen will show two program icons instead of one large one. The two icons show the
different left and right programs.
By pressing either the left or right ( / ) arrow button, the recipient can select a hearing
program to be applied to both Naída CIs if they want to set them to the same program. It is also
fine for the recipient to have each Naída CI on different programs (example: P2 on Left side
and P3 on Right side) if they prefer or are advised to do so by their hearing care professional.

AB myPilot Battery Status

The status of the AB myPilot battery is shown with a battery symbol in the Home screen. Battery
consumption and operating time depend on the level of use. With normal use, the AB myPilot
will run for several days before needing to be recharged. Once the battery is near depletion, the
low battery symbol will appear in the top left corner of the Home screen.
After the low battery symbol appears, the AB myPilot will still run for about an hour; however,
the recipient should recharge the battery as soon as possible.
ZoomControl Screen (Optional/Not available for the Naida CI Q30 Sound Processor)
If the Naída CI(s) is equipped with ZoomControl, this special feature allows you to choose
the direction in which to focus the hearing system. Bilateral recipients have access to left/
right and front/back ZoomControl, while unilateral recipients have access to front/back. The
ZoomControl screen is only accessible from the standard mode.
Direct Access of the ZoomControl Screen
A special function of the center button is to direct access to the ZoomControl screen. If you
press and hold the center button for about two seconds, you will enter the screen, bypassing
other menu options described later. The screen displays the default direction. Use the left and
right ( / ) arrow keys to change the direction in which you want to focus.

Access via Menu

To access the ZoomControl screen, press the center button, select ZoomControl, and choose
the desired direction using the arrow keys.
20
AB myPilot User Guide