Setting The Light Effect; Upgrading The Software - Samsung LN-T4071F Instructions Du Propriétaire

Setting the Light Effect

You can turn the LED on the front of TV on/off.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Light Effect", then press the ENTER
button.
. Press the ▲ or ▼ button to select "Off", "In Standby", "In Watching TV" or "Always",
then press the ENTER button.
• Off: LED will not come on.
• In Standby: Turns the LED on in standby mode.
• In Watching TV: Turns the LED on while watching TV.
• Always: LED will come on after you turn the TV off.
Press the ExIT button to exit.
Set the "Light Effect" to "Off" to reduce power consumption.

Upgrading the Software

Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG
(726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a
USB drive to the USB port located on located on the side of your TV.
1. Insert a USB drive containing the firmware upgrade into the WISELINK port on
the side of the TV.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
3. Press the ▲ or ▼ button to select Software upgrade, then press the ENTER button.
4. Press the ENTER button.
The message Scanning for USB... It may take up to 30 seconds. is displayed.
Please be careful to not disconnect the power or remove the USB drive while
upgrades are being applied. The TV will shut off and turn on automatically after
completing the firmware upgrade. Please check the firmware version after the
upgrades are complete.
When software is upgraded, video and audio settings you have made will return to
their default (factory) settings. We recommend you write down your settings so that
you can easily reset them after the upgrade.
English - 6
TV Setup
▲More
blue Screen : Off
Melody : Medium
PC
Home Theater PC : Off
Light Effect : In Watching TV ►
Energy Saving : Off
▼ More
Move Enter
TV Setup
▲More
blue Screen : Off
Melody : Medium
PC
Off
Home Theater PC : Off
In Standby
Light Effect : Watching Mode On
In Watching TV
Energy Saving : Off
Always
▼ More
Move Enter
LED
TV Side Panel
USb Drive
TV Setup
▲ More
HDMI black Level : Low
Film Mode : Off
Wall-Mount Adjustment
PIP
Function Help : On
SW Upgrade
Move Enter
SW Upgrade
Scanning for USb...
It may take up to 0 seconds.
►
►
►
►
►
Return
Return
►
►
►
►
►
►
Return