Declaration Of Conformity; Manufacturer's Warranty - STEINEL IR180UP Instructions De Montage

Troubleshooting
Malfunction Cause
Sensor Switch n Fuse blown,
without power
not switched ON
n Short circuit
Sensor Switch
n Light bulb burnt out
does not switch ON
Sensor Switch n Twilight setting in
does not switch ON
night-time mode dur-
ing daytime operation
n Additional two-way
switch OFF
n Fuse blown
Sensor Switch
n Continued movement
does not switch OFF within the detection
zone
n Switched ON light is
within detection zone
of IR 180 UP and
switches ON again as
a result of tempera-
ture change
n Permanent light op-
eration switched ON
(red LED illuminates)
n Other Sensor Switch
is parallel-connected
and still active
Sensor Switch
n Switched ON light
keeps switching ON/OFF is within IR 180 UP
detection zone
n Animals moving in
IR 180 UP detection
zone
n Curtains, flowers,
etc. move within the
detection zone of the
HF 360 UP and cause
switching again by
motion
Remedy
n Replace fuse; switch
ON mains switch;
check wiring with
voltage tester
n Check connections
n Replace light bulb
n Readjust
n Switch power on
n New fuse, check con-
nection if required
n Check detection zone
n Check detection zone
n Switch off permanent
light operation
n Await time setting
of the other Sensor
Switch
n Check detection zone
n Check detection zone
n Check detection zone
- 20 -
Operation/Maintenance
The Sensor Switch is suitable for au-
tomatic switching of light. The unit is
not suitable for special burglary alarm
systems, since it lacks the sabotage
protection prescribed for this purpose.

Declaration of conformity

STEINEL Vertrieb GmbH hereby
declares that the HF 360 AP radio
equipment type conforms to Directive
2014/53/EU. The full wording of

Manufacturer's warranty

This STEINEL product has been
manufactured with great care, and its
operation and safety have been tested
in conformity with the current regula-
tions. Production is also submitted
to final random-sample testing.
STEINEL guarantees that it is in
perfect condition and proper work-
ing order.
The warranty period is 36 months,
starting on the date of sale to the user.
We undertake to remedy faults caused
by material or manufacturing defects.
This warranty undertaking shall be
performed by the repair or replace-
ment of the defective parts, at our
own discretion.
This warranty shall not cover dam-
age to wearing parts or damage and
faults caused by incorrect operation
or maintenance. Further consequential
damage to external items is excluded.
Claims under warranty shall only be
accepted if the product is sent fully
assembled and well packed complete
with sales slip or invoice (date of pur-
chase and dealer's stamp) to the ap-
propriate Service Centre or handed in
to the dealer within the first 6 months.
The surface should be cleaned if dirty
with a damp cloth (without cleaners).
the EU Declaration of Conformity is
available for downloading from the
following Internet address:
http://www.steinel.de
Repair Service:
Please ask your nearest service centre
how to proceed for repairing faults not
covered by the warranty or occurring
after the warranty expires.
G B
1 3
Y E A R Y E A R
MANUFACTURER'S MANUFACTURER'S
WARRANTY WARRANTY
- 21 -