Remington Advanced Colour Protect 2300W AC Dryer AC8605 Mode D'emploi page 4

ENGLISH
• Do not leave the appliance unattended while plugged in.
• Do not place the appliance on any soft furnishings.
• Do not use attachments other than those we supply.
• Do not set the appliance down while still on.
• Do not twist or kink the cable, or wrap it round the appliance.
• Do not use the appliance if it is damaged or malfunctions.
• Check the cord regularly for any sign damage.
• This appliance is not intended for commercial or salon use.
• WARNING: Contains traces of nuts.
PARTS
1. Advanced micro conditioning dryer ring
infused with Shea oil and U.V. filters
2. Heat selector switch (N, O, P)
3. Speed selector switch (0, F , E)
4. Cool shot
5. Colour protect heat sensor on indicator
light
INSTRUCTIONS FOR USE
1. Wash and condition your hair as normal.
2. Squeeze out excess moisture with a towel and comb through.
Hairsprays contain flammable material – do not use while using this product.
3. Attach the concentrators or diffuser by fitting it to the front of the hairdryer and
twisting clockwise to lock it.
4. Plug the product into the mains power supply.
5. Switch your hairdryer on and select the desired speed setting (low F or high E) using
the speed selector switch.
6. Select the desired heat setting (low N, medium O or high P) using the heat selector
switch.
7. After use, turn the appliance off and unplug it.
8. Let the appliance cool down before cleaning or storing away.
Intelligent Colour Protect Heat Sensor
• Press the
• If the Intelligent Colour Protect Heat Sensor is on during styling, the light will come on
indicating the sensor is monitoring the air temperature and continually regulating the
heat to help prevent colour fade caused by over heating.
4
∞
button to activate the Intelligent Colour Protect Heat Sensor.
6. 7 mm concentrator
7. 11 mm concentrator
8. Diffuser
9. Inlet grille
10. Colour protect heat sensor on/off button
11. Hang up loop