Goelst 6000 Serie Manuel page 15

Setting curtain positions (6300 and 6600)
Determining end positions
End positions of the curtain are determined by the position of the endstops 6002. The end
positions can be changed by moving and securing the end stops to an alternative location on
the profile. Using hexagonal Allen key size No. 2.
Changing button functions for opening and closing
First remove all plugs from the motor-unit on a system already connected. Place an RF
WM001C
receiver in port 2 (black) on the under side of the motor-unit and then insert the round 24V
!
supply plug.
When not being operated the motor-unit will automatically exit the programming mode after1
minute: the LED will go out, return to step 1.
WM001G
WM003C1G
2
For several linked systems:
!
Remember that changing the "open" and "close" positions will have consequences for any
central control of linked
WM001C
Control
WM001G
WM001C
WM003C1G
WM001G
2
WM003C1G
6002
WM003C WM009C
STEP 1
WM002G WM003G
Using the transmitter, keep the stop button pressed: a green led will start
flashing in the bottom of the motor unit, release the button only when the
LED flashes red. (after approx.8 seconds). The system overlap carrier will
move briefly in both directions.
WM006G WM004G
STEP 2
Briefly press the desired button for closing the curtains.
The system will close to confirm the new setting and the LED goes out
WM003C WM009C
WM002G WM003G
Functions of OPEN and CLOSE buttons:
WM003C WM009C
- Keeping 'open' or 'close' button pressed for more than 1 second: the
system will run until the button is released.
- briefly press and release either button, less than 1 second: the system
will run until an end-position is reached or until the button is again
briefly pressed and released.
WM006G WM004G
WM002G WM003G
Functions of STOP button :
- pressed briefly and released: the system stops if running.
- keep the button pressed longer: the motor unit enters programming
mode.
WM006G WM004G
6002
EN Range of NiceWay transmitter modules
IT Gamma dei moduli-trasmettitore NiceWay
FR Gamme des modules-émetteur NiceWay
ES Gama de los módulos-transmisores NiceWay
DE Die Reihe der NiceWay Sendermodule
PL Gama modułów-nadajników NiceWay
NL Assortiment zendmodules NiceWay
WM080G
A B
C D
EN Range of NiceWay transmitter modules
IT Gamma dei moduli-trasmettitore NiceWay
FR Gamme des modules-émetteur NiceWay
ES Gama de los módulos-transmisores NiceWay
DE Die Reihe der NiceWay Sendermodule
PL Gama modułów-nadajników NiceWay
NL Assortiment zendmodules NiceWay
EN Range of NiceWay transmitter modules
IT Gamma dei moduli-trasmettitore NiceWay
FR Gamme des modules-émetteur NiceWay
WM080G
ES Gama de los módulos-transmisores NiceWay
DE Die Reihe der NiceWay Sendermodule
A B
Gama modułów-nadajników NiceWay
PL
C D
NL Assortiment zendmodules NiceWay
WM080G
A B
C D

NL EN DE FR
WM240C
A B
C D
WM240C
A B
C D
WM240C
A B
C D