Brandson Equipment 303228/20180122NT002 Manuel D'utilisation page 37

9. Changing the battery
Unlock the battery by pressing the "Battery unlocking" button (1) and
then slide the battery out of the device (2). To insert a new battery, slide
the battery into the cordless screwdriver on (2) until it locks into place.
10. Charging the battery
The battery has a coaxial socket for charging the battery. Charge the bat-
tery using the charger/charging station provided. A status LED is present
on the charger/charging station. As long as the LED is red, then charg-
ing is in progress. When the LED turns green, the battery is then fully
charged and can be reused.
37
English