Brandson Equipment 303228/20180122NT002 Manuel D'utilisation page 36

7. Torque adjustment
Select the desired torque and set it using the "torque-adjustment ring".
Here "1" is the lowest and "18" the highest resistance. If you want to
drill, select the drill symbol where there is no torque limit.
8. Selecting the speed
Select the desired speed using the "Speed level switch".
Caution! Never use it when the device is being operated!
Speed
In addition, you can adjust the rotation speed depending on the amount
of pressure using the "On/Off" button.
36
• 0-350 (level 1)
• 0-1350 (level 2)
English