Table des Matières
Publicité
1.3
1.1
3. TECHNICAL SPECIFICATIONS
Code
50683010
Capacity
12 tubes
Max. tube size (ØxL)
20x170 mm
Shaking speed
15 rpm
Platform
255x175 mm
Dimensions (LxWxH)
350x200x95 mm
Weight
2.5 Kg
4. INSTALLATION / SETTING UP
Preliminary inspection
Unwrap the oscillating stirrer, take off the involving plastic and take off the polyspan
protection in which it comes fitted. Take off all protections and without connecting the sti-
rrer to the power supply, make sure that it does not present any damage because of the
shipment. In case it presents any damage, tell it immediately to your transport agent or
dealer so that they can make the claims in the correct time limit.
Please keep the original wrapping; you will always need it for returns enclosed with all
the accessories supplied.
Please check that all the accessories are enclosed with the equipment:
- Schuko wire
- User's manual
- Warranty certificate
Page 10
Instruction manual 50683010
ENGLISH
1.2
Version 1 July-08
We will only accept any equipment return within 15 days after delivery and provided
it comes in its original wrapping.
Installation
Before using the oscillating stirrer, it is convenient for you to familiarize with its com-
ponents and basic essentials, as well as with its control functions.
PLEASE READ THOROUGHLY THE INSTRUCTIONS BEFORE CONNECTING
AND OPERATING WITH THIS EQUIPMENT WITH THE AIM OF ACHIEVING
THE HIGHEST FEATURES AND THE MAXIMUM DURABILITY OF THE INS-
TRUMENT.
Put the oscillating stirrer on top of a horizontal, plane and stable table making a free
space at least at 30 cm per side. Do not put the equipment near any warm supply (bur-
ners, blowlamps...), nor expose it directly to the sun, etc.
During operation, flammable liquids must be out of the working area.
Please insert the Schuko wire that feeds the AC electric current in the base of current 220
V, 50 Hz ± 10% provided with earth wire and to the other end to the stirrer socket (1.3).
Neither the manufacturer nor the distributor will assume any responsibility for the
damages produced to the equipment during its installation or damages to persons suf-
fered by the improper use of the electric connection. The tension should be 220 V, 50
Hz ± 10%.
Setting up
Put the tubes on the anti-skid grooves perfectly closed to avoid leaks during stirring.
Press the on/off switch (1.1) to start with the rocking motion of the stirrer.
To stop stirring press again the on/off switch (1.1).
If you are not using the stirrer for a long period of time please make sure it is discon-
nected from the net and protected from dust (this way you will avoid accidents and will
extend its working-life).
Security
The stirrer must be used by previously qualified staff that knows how the equipment
works thanks to the user manual.
Put the stirrer on top of a horizontal, plane and stable table making a free space at least
at 30 cm per side.
Do not put the stirrer near any warm supply (burners, blowlamps...), nor expose it
directly to the sun, etc. Avoid vibrations, dust and dry environments.
During operation, flammable liquids must be out of the working area.
When you are not using the stirrer for a long period of time please make sure it is
unplugged in order to avoid possible accidents.
Version 1 July-08
Instruction manual 50683010
ENGLISH
Page 11
Publicité
Table des Matières
