Bushnell Northstar GoTo Manuel D'instructions page 13

M
(NOTE: Make certain that the telescope is set up on a level surface.)
STEP 1: POINT NORTH
Point the telescope in the direction of North.
NOTE: THE USER SHOULD JUST ATTEMPT TO GET THE TELESCOPE POINTED RELATIVELY CLOSE TO NORTH. THE
ALIGNMENT WILL BE REFINED AS WE PROGRESS. HOWEVER, IF YOU CAN FIND THE BIG DIPPER AND USE THE
"POINTER STARS", FOLLOW THE ARROW ON THE DIAGRAM TO THE NORTH STAR. THE NORTH STAR LIES DIRECTLY
ABOVE DUE NORTH!
When you turn the telescope on, a scrolling message will appear:
BUSHNELL NORTHSTAR Vx.x
Following this message, the telescope will execute a diagnostic check and level the telescope tube in relation to the
telescope mount.
Then the default menu will appear:
SELECT MODE
ALIGN EARTH ][
This mode assumes that even if the telescope user is a first time user and does not know anything about astronomy
that they can be successful aligning the telescope in a few simple steps.
The ALIGN EARTH option is flashing.
Press ENTER to choose ALIGN EARTH option.
NOTE: ANY FLASHING ITEM ON THE DISPLAY IS A MENU CHOICE. OTHER CHOICES ARE AVAILABLE BY USING THE
SCROLL UP OR SCROLL DOWN BUTTONS.
ALIGNING NORTHSTAR FOR THE FIRST TIME
13