Daikin DZ17VSA Instructions D'installation page 58

h p a
eat ump dVanced
SUBMENU ITEM
Clear Faults
Fault 1
Fault 2
Fault 3
Fault 4
Fault 5
Fault 6
SUBMENU ITEM
Time Stamp (TS)
Mode (MD)
Compressor Reduction Mode
(CRM)
Requested and Actual % Demand
(RAD)
Requested and Reported ID CFM
(RAF)
Outdoor Air Temperature and
Outdoor Fan RPM (ATOF)
Discharge Temperature and
Outdoor Coil Temperature (DCT)
Outdoor Liquid Temperature
(DLT)
Pressure Sensor and Suction
Temperature (PSDST)
f m
eature enu
INDICATION/USER
MODIFIABLE OPTIONS
NO or YES
Most recent heat pump fault
2nd most recent heat pump fault
3rd most recent heat pump fault
4th most recent heat pump fault
5th most recent heat pump fault
6th most recent heat pump fault
COMMENTS
Provides compressor run time in hours.
Current system operation mode (COOLING, HEATING, COOLING STARTUP, HEAT-
ING STARTUP, OIL RETURN, DEFROST, STOP).
Displays ON or OFF status. ON indicates that the reduction mode is operating and
the compressor is running at a lower speed than the cooling load would normally
require.
Displays a 0-100% value, based on a ratio of the requested cooling demand to what
the system is actually providing.
Compares the indoor airflow to what the indoor equipment has reported.
Displays the outdoor air temperature as well as the outdoor fan speed (RPM).
Displays the discharge temperature and outdoor coil temperature sensor readings.
Displays the outdoor liquid temperature sensor reading.
Displays the pressure sensor reading which is taken slightly upstream of the suction
accumulator and outdoor suction temperature sensor reading.
DiAGnoSTicS
COMMENTS
Selecting "YES" clears the fault history.
STATUS
58