Fein ALG80 Mode D'emploi page 12

en
12
Character Unit of measure-
ment, international
I
mA
max
C
Ah
t
min
T
°C/ °F
m
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
min, m/s
Operating Instructions.
Connect the battery charger to the socket outlet with-
out a battery inserted. The green LED indicator lights
up and signals operational readiness.
Insert the battery.
The monitoring of the charge procedure is signalled by
a flashing green light.
The end of the charge procedure is indicated by contin-
uous green lighting.
The rapid charging starts automatically as soon as the
battery temperature is within the charge-temperature
range of 5 °C to 45 °C.
Meaning of the LED indications
LED indicator
Continuous green light
ALG80BC:
Continuous blue light
Continuous yellow light
Unit of measure-
ment, national
mA
Ah
min
°C/ °F
m
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
2
min, m/s
Meaning
The battery charger is ready for operation; mains voltage is given.
The battery charger is ready for operation; mains voltage is given.
®
The Bluetooth module is coupled with a mobile device.
Note:
®
The Bluetooth module automatically switches to energy saving mode after a
longer period of inactivity. By inserting a Li-ion battery, the Bluetooth
activated again.
The battery temperature is not within the charge-temperature range of 5 °C to
+45 °C. The rapid charging starts as soon as the battery reaches the allowable
charging-temperature range.
Explanation
Maximum rated direct output current
(max. rated charging current)
Capacity
Charge duration
Temperature
Max. Bluetooth
Basic and derived units of measurement from
the international system of units SI.
2
When lithium-ion batteries are fully charged, the bat-
tery charger switches off automatically.
Repeated inserting of a charged battery leads to over-
charging and affects the service life of the battery.
If the battery becomes discharged within a short time
despite being charged correctly, it has reached the end
of its service life.
The installed fan starts and stops depending on the
charger's internal temperature.
On the ALG80BC, alternate flashing of the green and
blue LED indicates connection readiness of the Blue-
®
tooth module. If the blue LED lights up continuously,
an active Bluetooth
®
operating range
®
connection exists.
®
module is