1. Remove the ear-pad from the housing part.
2. Put the new ear-pad on the housing so that
the drop-in pins can lock in the corresponding holes.
3. Press the new ear-pad with the thumbs of both hands
to the housing until you hear a clear "click" noise.
Safety
When plugging in any of the DT 200 - series headsets to
the drive amplifier, we recommend that this is done before it is
fitted over the ears for use. This will give the technician the
chance to check that the volume levels are not too high. Please
remember that the user could well be a highly-paid presenter
and the consequences of damaging his / her ears may well prove
to be music to the ears of the lawyer! The very low levels of
distortion can make listening levels higher than is perceived
and we have to warn you that listening to programme or talk-
back at high levels for long periods can permanently damage
your hearing.
Models
Studio headphone, 80 Ω, black, with
DT 250
WK 250.07 coiled cable, plug-in type
(stereo mini jack plug
with 1/4" adapter) . . . . . . . . . . Order # 442.844
Studio headphone, 250 Ω, black, with
DT 250
WK 250.07 coiled cable, plug-in type
(stereo mini jack plug
with 1/4" adapter) . . . . . . . . . . Order # 443.530
Single-ear studio headphone, 80 Ω,
DT 252
black, with WK 250.07 coiled cable,
plug-in type (stereo mini jack plug
with 1/4" adapter) . . . . . . . . . . Order # 445.177
Single-ear headset, 200/80 Ω. . Order # 441.309
DT 280
Single-ear headset, 200/250 Ω. Order # 447.269
DT 280
DT 280 V.11 Headset, 200/80 Ω with
integrated pre-amp . . . . . . . . . Order # 442.860
Headset, 200/80 Ω . . . . . . . . . . Order # 441.317
DT 290
Headset, 200/250 Ω . . . . . . . . . Order # 447.277
DT 290
DT 290 V.11 Headset, 200/80 Ω
with integrated pre-amp . . . . . Order # 441.384
DT 291 PV Headset, 80 Ω, condenser microphone
(omnidirectional), with integrated
preamp for phantom
powering . . . . . . . . . . . . . . . . . Order # 447.129
DT 291 PV same as above, but 250 Ω . . . . Order # 447.137
19