Table des Matières
Publicité
2-7. Setting Gun Polarity For Wire Type
Tools Needed:
3/4 in
2-8. Connecting Spool Gun
NOTE
OM-192 440 Page 12
Ref. ST-192 432
If connecting a spool gun to this welding power source, refer to instructions
provided with the appropriate spool gun model for proper connection
procedures.
1
Polarity Changeover Label
2
Positive (+/Red) Output
Terminal
3
Negative (–/Black) Output
Terminal
Always read and follow wire
manufacturer's
polarity.
Close door.
1
2
3
recommended
Ref. ST-802 285-B
Publicité
Table des Matières
Dépannage
