RIKA GSM RIKATRONIC4 Notice D'utilisation page 27

3. ASSEMBLY
Attachments and connections - diagram
Assembly steps
For the right positioning of the GSM modem you find the holes in the stove. Remove the front panel (depending
on type of stove the side panel too) of the stove and lay it on a soft underlay to prevent damage. If you use
the IDEA model, slide side panel up.
1. Attach GSM modem to the assembly plate using M3 x 20 mm cylinder head screws.
2. Screw the mini antenna into the GSM modem.
3. Plug the adapter cables in and fix them to the GSM modem using knurled screws.
4. Plug the short cable into the socket of the GSM modem.
5. Connect the 4-pole JST plug to the main board.
Mounting examples:
2x N111911
Duo Taptite
|27
26