Service And Repair - RIDGID SeeSnake CS65XR Mode D'emploi

Service and Repair

Improper service or repair can cause the
CS65 to be unsafe to operate.
xr
Service and repair of the CS65
performed at a RIDGID Independent Autho-
rized Service Center. To maintain the safety
of the monitor, make sure a qualified repair
person services your unit using only iden-
tical replacement parts. Discontinue using
the CS65 , remove the battery, and con-
xr
tact service personnel under any of the fol-
lowing conditions:
• If liquid has been spilled or objects
have fallen into the equipment.
• If the equipment does not operate nor-
mally when operating instructions are
followed.
• If the equipment has been dropped or
damaged.
• If the equipment exhibits a distinct
change in performance.
For information on your nearest RIDGID In-
dependent Service Center or any service or
repair questions:
• Contact your local RIDGID distributor.
• Visit RIDGID.com.
• Contact Ridge
Technical Service
rtctechservices@emerson.com or, in
the USA and Canada, call 1-800-519-
3456.
18 – English – CS65
must be
xr
Tool Company
Department at
xr
Disposal
Parts of your system contain valuable mate-
rials that can be recycled. There are compa-
nies that specialize in recycling that may be
found locally. Dispose of the components in
compliance with all applicable regulations.
Contact your local waste management au-
thority for more information.
EC Countries: Do not dis-
pose of electrical equipment
with household waste!
According to the Europe-
an Guideline 2012/19/EU for
Waste Electrical and Electron-
ic Equipment and its imple-
mentation into national legis-
lation, electrical equipment
that is no longer usable must
be collected separately and
disposed of in an environmen-
tally correct manner.
Battery Disposal
EC Countries: Defective or used batteries
must be recycled according to the guideline
2006/66/EEC.