HammerSmith PowerGrip Mode D'emploi page 2

EN
Suitable for:
• Butterfly nuts
• Square nuts
• Hexagonal nuts
• Castellated nuts
• Covers
• Eye bolts
• Bent screw hooks
• Straight screw hooks
• Steel screw caps
Important safety instructions:
1. Make sure that no liquids (e.g. water, greases, etc.) enter the PowerGrip universal nut, as
this could impair the functionality.
2. Never attempt to oil the PowerGrip universal nut.
3. Always wear eye protection when working with the Hammersmith PowerGrip.
INSTRUCTIONS FOR USE OF THE POWERGRIP
Assembly & use WITHOUT PowerGrip adapter
Plug the PowerGrip universal nut directly onto the ratchet until
it clicks into place.
Then place the PowerGrip universal nut on the screw/hook/nut
and turn the ratchet clockwise or anti-clockwise to tighten or
loosen the screw. To change the direction of rotation, change to
the desired direction on the rotation direction switch.
For disassembly, pull apart the individual parts by tugging.
Use WITH the PowerGrip adapter for drills or cordless screwdrivers
Slide the PowerGrip adapter into the drill or cordless
screwdriver chuck. Then plug the PowerGrip universal
nut onto the adapter. Make sure that the universal
nut and adapter are locked in place. Now place the
PowerGrip universal nut on the screw/hook/nut, and
carefully tighten or loosen it using the drill or cordless
screwdriver. To change the direction of rotation, change to the desired direction on the drill.
Cleaning and maintenance
You can clean the PowerGrip universal nut and PowerGrip adapter with a moist, soft cloth.
Do not use scouring agents or caustic cleaning agents.
Delivery contents:
1 x Ratchet, 1 x PowerGrip Adapter,, 1 x PowerGrip 7 - 19 mm universal nut
Made in China
FR
Convient aux :
• écrous à oreilles
• écrous à quatre pans
• écrous à six pans
• écrous à créneaux
• couvercles
• boulons à œil
• crochets à visser coudés
• crochets à visser droits
• bouchons vissables en acier