Before Assembly - Regalo 1350 Instructions De Montage

Before Assembly

A
PLEASE CHECK TO MAKE SURE YOU HAVE THE FOLLOWING PARTS:
A
Play Yard Gate Frame (8 Panels)
B
Plastic Mounting Brackets (4 − Attached to Gate Frame)
C
1" Wall Mount Screws (8) (requires a Phillips/cross-head screwdriver)
BEFORE USING PRODUCT
Read and follow all instructions carefully to ensure that your gate and extensions are properly installed. Improper installation
could result in the gate becoming unstable or dislodged from the doorway. Always make sure the extension is securely attached
to the gate before using. The safety of your child is your responsibility. Please keep these instructions for your reference.
IMPORTANT
• The four mounting brackets must be used in securing the gate
to the wall. These brackets prevent the gate from dislodging from
its opening and becoming unstable.
• If hardware mounting to a surface other than drywall or wood,
please consult with a professional about installation.
• The maximum width of this gate is 192 inches.
F
B
C
CARE AND MAINTENANCE
Periodically check the gate for signs of damage, wear, or
missing components. Do not use if any part is missing, worn
or damaged. Check the gate regularly to ensure all the
hardware and mountings are tightened. Do not use abrasive
cleaners or bleach. Clean by sponging with warm water and a
mild detergent.
English