Setting The Gain - Beyerdynamic Opus 100 Notice D'utilisation

1.6

Setting the Gain

First adjust the gain of your transmitter (only TS 100; refer to chapter 3.3). Once the
transmitter gain is optimised, it is necessary to match the receiver's output gain to your mixing
console or PA system. Adjust the gain control (5). Setting the gain too high may cause distor-
tion.
1.7 Mounting NE 100 into ZTE 100/200 Mounting Bracket
NE 100
ZTE 100/200
Illustration 1
• For mounting the NE 100 receiver into the ZTE 100/200 mounting bracket the NE 100 has
one hole on the right and on the left side at the bottom.
• The NE 100 can be mounted into the ZTE 100/200 in two ways.
• If the receiver is to be mounted further to the back refer to illustration 1.
• If the receiver is to be mounted further to the front refer to illustration 2.
• The ZTE 100/200 is supplied with 2 screws for mounting the NE 100 into the ZTE 100/200
and 4 screws for 19"-rack mounting.
18
NE 100
ZTE 100/200
Illustration 2