6
The Synexis C8 charger has been designed for the use with the Synexis tour guide system from
beyerdynamic. For a detailed description of the operating instructions, please refer to the Synexis system
manual, which you can download at www.beyerdynamic.com/synexis.
Supplied accessories
• Power cable
• Power cord extension
1. Controls and indicators
Charging status of handheld transmitter
Charging compartment for handheld transmitter
Power on LED
Charging compartments for beltpack transmitters / beltpack receivers
Ground
Fuse
Mains connection
Connection to loop through another charger
2. How to use the charger
•
The Synexis C8 charger has been developed for charging the rechargeable batteries inside the
Synexis RP beltpack receiver, Synexis TP beltpack transmitter and Synexis TH handheld transmitter.
It provides 8 charging compartments for the Synexis RP beltpack receiver or Synexis TP beltpack
transmitter and one charging compartment for the Synexis TH handheld transmitter.
•
The Synexis C8 charger has been designed for the installation into a 19" rack (3 U). When you install
the charger into a 19" rack, make sure that the charger is connected to a switchable mains supply.
Synexis C8