Tuning To Stored Radio Stations; Resorting Stored Radio Stations; Naming Radio Stations; Clearing Station Names - Philips FR-984 Manuel D'utilisation

TUNER

Tuning to stored radio stations

1 Turn SOURCE SELECT to TUNER to select the tuner.
TUNER is displayed.
y
2 Turn TUNER PRESET X to select a preset radio station.
y , the preset number and station are displayed.
PRESET

Resorting stored radio stations

After programming radio stations, you might want to change
their sequence. RESHUFFLE allows you to exchange the
positions of presets.
1 Choose * TUNER from the menu and press NEXT 2.
2 Choose RESHUFFLE and press NEXT 2.
, a preset number and station are displayed.
y
PRESET
3 Turn TUNER PRESET X to select a preset station.
4 Press ENTER / OK to confirm the selection.
The selected preset number SWAP <-> and a second
y
preset number are displayed.
5 Turn TUNER PRESET X to select the other preset station.
6 Press ENTER / OK to confirm the exchange.
RESHUFFLED is displayed briefly and these two
y
preset numbers are swapped.
22

Naming radio stations

It is possible to assign a name to any of the preset radio
stations. RDS station names also can be overwritten.
1 Choose * TUNER from the menu and press NEXT 2.
2 Choose GIVE NAME and press NEXT 2.
A preset radio station is displayed.
y
3 Turn TUNER PRESET X to select the preset to be renamed.
4 Press ENTER / OK to confirm your selection.
The existing name or ________ is displayed.
y
5 Turn TUNER PRESET X to select a letter and NEXT 2 or
1 PREV. to move to the next or previous position.
6 After you have entered the entire name, press ENTER / OK
to confirm.
STORED is displayed and the name is stored.
y
Note: If you want to use the transmitted RDS station name
again, simply clear the given name.

Clearing station names

1 Use the menu option * TUNER, choose GIVE NAME.
A preset radio station is displayed.
y
2 Turn X MENU NAVIGATOR to select the name to be
cleared.
3 Press ENTER / OK to confirm your selection.
4 Press 1 PREV. while the first letter is flashing.
CL is flashing to the left of the station name.
y
5 Press ENTER / OK to clear the station name.
Or, if you have changed your mind,
press 1 PREV. to leave the station name as it is.