Troubleshooting - Porter & Charles DW18PCFI Manuel D'utilisation

USER INSTRUCTIONS
5

TROUBLESHOOTING

The dishwasher can to signal a number of malfunctions by turning on various
indicator lights, as described below (see following table):
FAULT
E1
E3
E4
E5
E6
Light off
Rev 0.0
Acquastop failure
The anti-fl ooding system has tripped (only for models
fi tted with this feature). Activates in case of water leaks.
Contact the technical assistance service.
Water heating malfunction
The water is not heated or is incorrectly heated.
Repeat the washing program; if the problem persists,
contact the technical assistance service.
Water temperature monitoring malfunction
Interrupt the current program. Switch off the
dishwasher, switch it back on again, program a new
cycle and press start. If the problem persists, contact
the technical assistance service.
Water intake malfunction
The appliance does not take in water or does so
incorrectly. Make sure the water connections are
correct, that the water supply tap is open and that the
fi lter is not clogged. If the problem persists, contact
the technical assistance service.
Water pump-out malfunction
The appliance does not pump out the water or does
so incorrectly. Make sure the drain hose is not kinked
or crushed and that the siphon and fi lters are not
clogged. If the problem persists, contact the technical
assistance service.
Light on
DESCRIPTION
Tab. 4-01
Light fl ashing
EN
15