Safety Instructions; Safety Symbols; Symbol Meaning; General Power Tool Safety Warnings - Ego Power+ HTX6500 Mode D'emploi

N O
#2
#1
Original instructions
READ ALL INSTRUCTIONS!
READ OPERATOR'S MANUAL
WARNING:
Residual risk! People with electronic
devices, such as pacemakers, should consult their phy-
sician(s) before using this product. Operation of electrical
equipment in close proximity to a heart pacemaker could
cause interference or failure of the pacemaker.
WARNING:
To ensure safety and reliability, all repairs
and replacements should be performed by a qualified
service technician.

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the expla-
nations with them deserve your careful attention and un-
derstanding. The symbol warnings do not, by themselves,
eliminate any danger.
The instructions and warnings they give are no substitutes
for proper accident prevention measures.
WARNING:
Be sure to read and understand all
safety instructions in this Operator's Manual, including all
safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL: Indicates DANGER, WARN-
ING, or CAUTION. May be used in conjunction with other
symbols or pictographs.
WARNING:
The operation of any power tools can
result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power
tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We
recommend a Wide Vision Safety Mask for use over eye-
glasses or standard safety glasses with side shields.
56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX6500

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate.
Indicates a potential personal
Safety Alert
injury hazard.
To reduce the risk of injury,
Read Opera-
user must read the operator's
tor's Manual
manual.
WARNING: Do not use in the
Do Not Expose
rain or leave outdoors while it
To Rain
is raining.
Guaranteed sound power
level. Noise emission to the
XX Noise environment according to
the European community's
Directive.
This product is in accordance
CE
with applicable EC directives.
Waste electrical products
should not be disposed of with
WEEE
household waste. Take to an
authorized recycler.
Blade Length The length of the blade
65cm
Ø33 mm Cutting Max. Cutting capacity of the
Capacity blade
V Volt Voltage
Type or a characteristic of
Direct Current
current
.../min Per Minute Revolutions per minute
mm millimeter Length or size
cm Centimeter Length or size
n No Load Speed Rotational speed, at no load
0

GENERAL POWER TOOL SAFETY WARNINGS

WARNING:
Read all safety warnings, instructions,
illustrations and specifications provided with this
pool tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
5
EN