Activity Relay (R2); Extended Relay Function - Dedicated Micros System Sprite Guide De L'utilisateur

Activity relay (R2)

The activity relay (R2) can be configured to trigger in a number of different ways:
Close Relay closes on activity (default).
Open Relay opens on activity.
Unchanged Relay is not affected by activity.

Extended relay function

Provides a single contact closure for each camera with activity detected. This option works in conjunction with a c-bus relay
box. The length of time the relay closes depends on the dwell time in the Activity system setup menu. The default setting is off,
module 1 to 16 can be selected, depending on the address of the relay module used. Please refer to the c-bus relay module for
details on how to set this accessories address.
28 Activity System Setup Version 1.0