Detection Periods; Options - Dedicated Micros System Sprite Guide De L'utilisateur

Detection Periods

This menu is used to enable or disable the activity and alarm detection
systems.

Options

The System Sprite has the ability to activate alarms and activity
detection between specific times, the options include:
Always off Disables alarms and activity detection (default).
Always on Enables alarms and activity detection.
On between This option allows the Alarms or Activity
detection to be enabled between certain times of
the day.
Keyswitch Allows an alarm contact (keyswitch) or alarm
panel set/reset trigger to enable and disable
alarms and activity detection.
To change the detection periods:
1. Use the cursor keys to highlight the Activity detection or Alarm option.
2. Press the right cursor key to move the highlight onto the Activity detection or Alarm mode to be changed.
3. Use the up and down cursor keys to change the Activity detection or Alarm mode.
4. Selecting Keyswitch or On between modes, will display additional options (see below).
5. To exit the Activity detection or Alarms options setup press the right cursor until the next option is highlighted.
Œ
To Navigate
Use the UP/Down keys to select Option
To Exit
Press the
MODE
16 Detection Periods
Activity detection
Alarms
16:49:52
•
Use the Right key to enter Edit Field
or
key to select next Menu Press and Hold the
Detection Periods
Always off
Keyswitch
Alarm input details Module 2 Contact 1
04/03/1999
Ž
Use the Up/Down keys to edit.
key to leave menus.
MODE
Version 1.0
VEXT