Skiddoü Espoo Guide D'utilisation page 13

• Safety belt length adjustment: Pull the adjustment buckle as indicated by the arrow to adjust
the length.
9. Securing hoop assembly (FIG. 9)
• Slide the ends of the securing hoop into the respective opening until a latching sound of the
lock is heard on both sides.
• The securing hoop may be detached from the frame by pressing the buttons on its sides.
CAUTION! The railing is optional and does not exempt the user from the use of 5-point seat belts.
10. Buggy folding (FIG. 10)
• Fold the roof. Simultaneously press buttons (1) and (2), provided on the handle, as shown in
the figure, and push the handle forward to fold the stroller.
CAUTION! Do not carry the stroller by holding the safety bar.
CAUTION! An additional strap, located inside the pocket behind the backrest, is used to support
the backrest during transport (FIG. 10 a).
11. Fitting the footrest cover, the rain cover, the mosquito net (FIG. 11)
a. Place the footrest cover over the footrest, then put it and fasten over the safety bar.
b. Place the rain cover on the pram and fasten it to the frame of the pram.
c. Place the mosquito net on the pram and fasten it to the frame of the pram.
IV. Maintenance, cleaning
The buyer is obliged to ensure correct assembly of all elements of the stroller, as well as to provide
adequate maintenance in order to keep the stroller in good technical condition.
Do not remove the stroller cover. Clean the textile using a wet sponge and a neutral detergent. It is
recommended to wipe the plastic parts regularly using a soft, wet cloth.
If metal parts become wet, quick drying of the parts is recommended in order to prevent rust
formation.
Lubricate moving parts with silicone grease, only if necessary. Regularly check the condition of
the wheels and of all moving parts.
Protect the moving parts against dust, dirt and sand. Make sure to store the stroller at a dry
place.
Do not fold or store a wet product, the product should not be stored in damp places, as it may
result in mould growth.
Do not expose the product to prolonged sunlight as the upholstery and plastic parts may become
discoloured or damaged.
Avoid contact with salt water (sea water, sea breeze, road salt) to avoid corrosion. If the pushchair
is exposed to salt water, rinse the frame and wheels with clean fresh water as soon as possible.
Do not make any modifications to the product. Use only original spare parts approved by the
manufacturer.
V. Warranty conditions:
1. The warranty is provided by skiddoϋ Polska Sp. z o.o. Sp. k. with its main office at
Kopanina 34, 60-105 Poznań, Poland.
2. The warranty covers skiddoü brand products.
3. skiddoϋ Polska Sp. z o.o. Sp. k. guarantees correct functioning of the product according
to technical conditions of use described in the user manual.
4. The warranty covers a period of 24 months, starting from the product sale date. If the
product is purchased by a company (VAT invoice), the warranty covers a period of 12
months.
5. The warranty cover may be extended for further 12 months. The extension may be
obtained by registering the product, filling a form available on the website: www.
skiddou.com.
6. The warranty is valid in the country of purchase.
7. The warranty of the manufacturer is non-transferable and may be used to make claims by
the first buyer only.
12