Please read the instructions for use thoroughly and retain for future use.
Safety of your child may be in danger if these instructions are not observed.
IMPORTANT - READ CAREFULLY
AND KEEP FOR FUTURE
REFERENCE
WARNING
WARNING
Never leave the child unattended.
Ensure that all the locking devices are engaged before use.
To avoid injury ensure that the child is kept away when unfolding and
folding this product.
Do not let the child play with this product.
Always use the restraint system.
Check that the pram body or seat unit or car seat attachment devices are
correctly engaged before use.
This product is not suitable for running or skating.
•
Product intended for children of age/weight: from 0 months to a
maximum of 15 kg.
•
Place the backrest of the stroller in the lowest position if used by a
newborn baby.
•
Use the wheel lock system when placing and picking the child up.
•
Additional loads deteriorate stroller stability (e.g. loads on the sides,
on the back or on the frame).
•
The stroller is intended for use by one child only.
•
Use only accessories included in the set or recommended by the
manufacturer. Do not use other parts or accessories.
•
In order to avoid hazards, never put loads heavier than 2kg inside the
basked and a maximum of 0.5 kg in the pocket provided behind the
backrest.
•
Do not hang any bags or other items on the handles to prevent the
stroller from falling over.
•
Do not use with an additional platform.
•
The maximum cushion thickness is 20 mm. Do not add any extra
cushions.
•
Do not place the product near open flame or other heat sources.
•
Do not leave the pushchair with the child inside on a sloping surface,
even if the brake has been locked.
•
Keep the pushchair out of the reach of children.
•
Before using the buggy make sure all wheels are installed correctly.
•
Safety belts should be adjusted every time to make sure the child is
adequately protected.
•
Lift the front suspension when entering or crossing a curb or a step.
•
Do not carry the stroller if the child is present inside.
•
This product meets the requirements of the EN 1888-1:2018 standard.
10