Product Disposal - Kinderkraft MINKY Guide D'utilisation

Fitting or replacing batteries:
In order to install or replace the batteries, remove the locking tab from element A1 using a
Phillips screwdriver (one screw) and replace the batteries, placing them according to their
proper polarity.
Swing control:
After installing the batteries or connecting the power supply using the wire provided (the
socket is located (B5) in the connecting point of elements A1, A7 and A8), press 1 to start the
mechanism (D4 LED will go on). To start the rocking function, press 5. Press several times more
to change the rocking intensity, which is signalled by LEDs D5 to D7. Holding down button 5
will stop the rocking function. To start the music function, press 2. To change the melody, press
4 (8 options). To change the volume, press and hold down button 4, and release the button
when the volume is satisfactory. To turn off the sound, press 2 again. To start the time switch,
press 3. By pressing this button you may change the timer setting (D1 – 10 min., D2 – 20 min.,
D3 – 30 min.) or switch off the function.
Maintenance and cleaning
Material cover with pillow: Remove from the frame (remove the toy bar, loosen Velcro strap
on the bottom, remove the cover first from the seat, and then from the backrest, remove the
pillow and secure the straps). Wash at max. 30°C, gentle process. Do not bleach. Do not dry in
a tumble dryer. Do not iron. Do not dry clean.
Toy bar and toys: Do not wash. Do not bleach. Do not dry in a tumble dryer. Do not iron. Do
not dry clean. Clean with a clean and damp cloth using mild soap. Allow to air dry. Do not
immerse in water.
Frame: Clean the metal frame with a soft, clean and damp cloth using mild soap.
Storage
Keep out of the reach of children.
Batteries should be removed from the toy if it is not used for a long time, to avoid corrosion
and leakage.

PRODUCT DISPOSAL

environment, as this kind of equipment includes hazardous substances, mixtures and
The symbol of crossed-out rubbish bin placed on the equipment,
packaging or the attached documents indicates that the product must
not be disposed of together with other waste.
The user shall provide worn equipment to a designated collection point
for proper processing. Information on the available system of collecting
electrical equipment waste may be found at the customer service of a
store and at the municipal office of the city / municipality.
Each household uses electrical and electronic equipment, and thus it is
a potential source of waste dangerous for humans and the
17