Safe operation
• Only use the unit with the protective hood fitted. This also protects the unit from the effects
of the weather.
• Disconnect any connected units that could pose a danger from the InScenio 230 after use to
prevent them from being switched on accidentally. For example:
– Units that can heat up.
– Units with exposed moving parts that could cause injuries, such as electric knives or saws.
• Never immerse the unit in water or other liquids.
• Never operate the unit if the housing is defective!
• Route lines in such a way that they are protected from damage and do not present a tripping
hazard.
• Do not use multi-outlet strips.
• Only carry out work on the unit that is described in this manual.
• Never carry out technical changes to the unit.
• Only use original spare parts and accessories.
Intended use
Only use the product described in this manual as follows:
• Operation only as a power supply distributor for suitable OASE products.
• while adhering to the technical specifications. (→ Technical data)
The following restrictions apply to the unit:
• Do not use InScenio 230 in conjunction with medical devices.
• Do not use for commercial or industrial purposes.
Product Description
Scope of delivery
A
Quantity
1
1
2
1
3
1
8
Description
InScenio 230
Protection hood
Ground stake