Gigaset Smoke Sensor 2.0 Mode D'emploi page 43

OPERATING AND INSTALLATION GUIDE
Function/meaning
Normal mode
Alarm mode
Battery nearly flat
Dirt in smoke chamber
No connection:
1) Smoke Sensor 2.0 too far away
from the base station
2) Smoke Sensor 2.0 not
connected to the base station
Actions required
None apart from the monthly function test
Stay calm, and act in a cool-headed and
appropriate manner.
When escape routes are unobstructed, exit
the house and close the doors behind you.
Then contact the fire service and warn
anyone potentially in danger.
Replace the batteries as described in
"Replacing the battery"
Clean the Smoke Sensor 2.0 as described
in "Looking after the device"
1) Fit the Smoke Sensor 2.0 near the base
station
2) Add the Smoke Sensor 2.0 as explained
in "Installation and use"
41