Usage; Starting The Application - Beurer HT 65 Mode D'emploi

4. USAGE

4.1 Starting the application

1. Dry your hair thoroughly before using the wave styler.
2. Make sure that your hair is clean and free from
styling products. This excludes special prod-
ucts designed to help your hair when shaping
curls or waves.
3. Comb your hair to get rid of any tangles.
4. Switch on the wave styler by pressing the ON/OFF button
5. To make it easier to set the temperature, first close the wave styler and slide
the transport lock [12] to the position. Set your desired temperature setting
using the - button [3] or + button [4]. The device is pre-set to 160°C when it is
switched on. Once you have set the temperature, slide the transport lock [12]
to the position. The respective temperature setting starts to flash white in
the LED temperature display [6]. Once the temperature setting lights up white
permanently, the heating rods [2] have reached the configured temperature
setting and the wave styler is ready for use.
6. Separate your hair into individual sections
with a width of approx. 2-4 cm. Hold the
strands taut.
17
[5].