Buttons Description; Open Window Detection - Jumbo MOOD BLANCO Notice D'installation Et D'utilisation

3.2 Buttons description:

1. Weekday
2. Open window Sign
3. Timer Sign
4. WIFI Sign
5. Time
6. Temperature
7. Modes: (M-manual mode,
P1/P2/P3/P4: 1st/2nd/3rd/4th
program period,
H-Holiday mode)
3.3 Screen display:
1. Weekday
2. Open window Sign
3. Timer Sign
4. Time
5. Temperature
6. Modes: (M-manual mode,
P1/P2/P3/P4: 1st/2nd/3rd/4th
program period)

3.4 Open window detection:

This heater is equipped with an open window detection function. If our control system
detects that the room temperature decreases dramatically in short period when the heater
is in the heating status, it will recognize that a window is open. The window sign on the
screen will start to flash and the heater will power off for 30 minutes and get back to the
previous setting automatically after 30 minutes.
You can deactivate and activate this function by long pressing for 5 seconds the "-"
button, and the open window sign on the screen will disappear and appear accordingly.
3.5 Temperature calibration
Long press "+" button for 5 seconds to enter the temperature calibration, adjust the
number by pressing "-" or "+" button, the calibration ranges from -5 to +5 degrees.
3.6 WIFI function on/off
Long press "Timer" button for 10S seconds to disable the WIFI connection and the WIFI
sign on the screen will disappear, long press "Timer" button for 10S seconds to turn it on
again.
GB
1 2 3
5
6
7
1
2
3
4
5
6
4