Advice On Energy Savings - Ariston SMART II Mode D'emploi

GB

ADVICE ON ENERGY SAVINGS

- Do not programme too high a temperature (in heating
mode) or too low a temperature (in cooling mode).
- Avoid installing the internal/external units in places di-
rectly exposed to sunlight (this could prevent the appli-
ance from operating at its best).
- Avoid opening and closing doors and windows too fre-
quently, as the ongoing heat exchange with the outside
hinders the operation of the air conditioning unit.
- Use the "TIMER" for the timed starting of the appliance
to prevent the appliance from operating unnecessarily
while you are out.
- Use the "SLEEP" function at night.
NOTES:
- In cooling mode, you may detect a slight mist coming
out of the Internal Unit for a few seconds: this is com-
pletely normal and due to the difference in temperature
between the air exiting the appliance and the air inside
the room.
- During operation, you may hear a noise similar to the
fl owing of water: this is completely normal, owing to
the liquid refrigerant fl owing through the piping.
- When the air conditioning unit starts or stops, especial-
ly in heating mode, you may hear a little creaking: this
is due to the thermal expansion of the parts making up
the appliance.
32