Function Buttons - Ariston SMART II Mode D'emploi

GB

FUNCTION BUTTONS

1. Button
Press it to turn the air conditioning
unit on and off. The LED located on
the internal unit lights up with the
unit on.
2. FAN button
Use this button to select the fan
speed, according to the following se-
quence:
(AUTOMATIC)
HIGH
MED (MEDIUM)
LOW
3. MODE button *
press the button to change the oper-
ating mode, according to the following
sequence:
(COOLING)
(DEHUMIDIFICATION)
(VENTILATION)
(HEATING)
▲
4. button and
It is used to set the desired tempera-
ture between 18°C and 32°C.
The temperature increases or de-
creases when you press
tons respectively.
5. TURBO button
It activates or deactivates the rapid
cooling/heating.
The rapid cooling takes place with the
fan at high speed with a temperature
set automatically to 18 °C.
The rapid heating takes place with the
fan at high speed with a temperature
set automatically to 32 °C.
22
▼
button
▲ ▼
or but-
1.
2.
FAN
6.
TIMER ON
CLOCK
10.
SLEEP
AUTO
11.
SWING
9.
FOLLOW
(*) If the mode is changed during op-
eration, the unit may not respond im-
mediately. Wait 3 minutes.
During operation in heating mode,
the air fl ow is not initially released.
The fl ow starts to be released after
2-5 minutes, when the temperature
of the internal heat exchanger has
increased.
4.
MODE 3.
7.
TIMER OFF
5.
TURBO
12.
SILENCE
8.
LED
13.