CPU_FAN1, PUMP_FAN1, SYS_FAN1~7: Fan Connectors
Fan connectors can be classified as PWM (Pulse Width Modulation) Mode or DC Mode.
PWM Mode fan connectors provide constant 12V output and adjust fan speed with
speed control signal. DC Mode fan connectors control fan speed by changing voltage.
This motherboard can automatically detect PWM and DC mode. However, you can
follow the instruction below to adjust the fan connector to PWM or DC Mode manually.
Switching fan mode and adjusting fan speed
You can switch between PWM mode and DC mode and adjust fan speed in BIOS >
HARDWARE MONITOR.
Select PWM mode or DC mode
Pin definition of fan connectors
PWM Mode pin definition
1
Ground
2
3
Sense
4
Default PWM Mode fan connectors
Default Auto Mode fan connectors
There are gradient points of the fan speed that allow you to adjust
fan speed in relation to CPU temperature.
+12V
Speed Control Signal
1
CPU_FAN1/ PUMP_FAN1
1
SYS_FAN6~7
DC Mode pin definition
1
Ground
3
Sense
1
SYS_FAN1~5
2
Voltage Control
4
NC
Overview of Components
27