Grandstream GWN7630 Guide D'installation Rapide page 5

CONNECT TO GWN7630 DEFAULT Wi-Fi NETWORK
GWN7630 can be used as standalone access point out of box, or after
factory reset with Wi-Fi enabled by default.
After powering the GWN7630 and connecting it to the network, GWN7630
will broadcast a default SSID based on its MAC address GWN[MAC's
last 6 digits] and a random password.
Note: GWN7630's default SSID and password information are printed
on the MAC tag of the unit.
This device has not been authorized as required by
the rules of the Federal Communications Commission.
This device is not, and may not be,
offered for sale or lease, or sold or leased,
until authorization is obtained.
WiFi
ACCESSING THE CONFIGURATION INTERFACE
A computer connected to the GWN7630's SSID, or to the same network
as the GWN7630 can discover and access its configuration interface us-
ing one of the below methods:
Method 1: Discover GWN7630 using its MAC Address
1. Locate the MAC address on the MAC tag of the unit, which is on the
underside of the device, or on the package.
2. From a computer connected to same network as the GWN7630, type
in following address using GWN7630's MAC address on your browser
https://gwn_<mac>.local
Example: If a GWN7630 has the MAC address 00:0B:82:8C:4D:F8, this
unit can be accessed by typing https://gwn_000b828c4df8.local on the
browser.
GWN7630
48V 0.5A GigE POE
~5~
Method 2: Discover GWN7630 using GWN Discovery Tool
1. Download and install GWN Discovery Tool from the following link:
http://www.grandstream.com/tools/GWNDiscoveryTool.zip
2. Open the GWN DiscoveryTool, and click on Scan.
3. The tool will discover all GWN76XX Access Points connected on
the network showing their MAC and IP addresses.
4. Click on Manage Device to be redirected directly to the GWN7630's
configuration interface, or type in manually the displayed IP address
on your browser.
Enter username and password to login. (The default administrator user-
name is "admin" and the default random password can be found at the
sticker on the GWN7630).
Notes:
● Make sure that the GWN7630 is not already paired with another
GWN76xx Access Point as slave, GWN7000 Router Series or GWN.
Cloud, otherwise the configuration interface cannot be accessed
● If the GWN7630 is already paired, make sure to unpair it first, or do
a factory reset.
● It is customer's responsibility to ensure compliance with local regula-
tions for frequency bands, transmit power and others.
● To manage GWN7630 over cloud, please refer to
cloud.
Refer to online documents and FAQ for more detailed information:
http://www.grandstream.com/our-products
https://www.gwn.
~6~