Miele BSK 18 Notice De Montage page 18

Produktgruppe 512
18 von 20
am
Parts required
Quantity Mat. no.
1 09079490
Note
This service and repair work should only be carried out by a suitably qualified electrician (with specialist
training, knowledge and experience, and recent related work experience) in accordance with all appropriate
local and national safety regulations.
Commissioning, servicing, modification, testing and maintenance of electrical appliances should only be
carried out in accordance with all appropriate legal requirements, accident prevention regulations and valid
standards. All regulations of the appropriate utility supply companies and standards relating to safety (not
limited to electrical safety) are to be complied with.
Danger!
Even with the machine switched off, voltage may be applied to some components.
Before starting any service work, the machine must be disconnected from the power supply. Suitable
measurements must be made to ensure that this is the case.
A general visual check and risk evaluation should always be carried out. Incorrect conversion or service work
can be dangerous (risk of fire, electric shock, etc.).
Danger!
Correct grounding function can be deactivated if casing parts are incorrectly assembled.
Correct grounding function must be ensured when reassembling the casing.
Carry out appropriate electrical safety checks.
Danger!
During installation, all accessible conductive parts that are not connected to ground must not have any link to
ground (strengthened double insulation).
To confirm this, insulation resistance and touch current measurements must be carried out.
Note
This installation kit contains:
1 wiring harness N1_ST18, X1-1L
1 strain relief
1 PW 6107, PW 6137, PW 6167, PW 6207 wiring diagram
1 bag with sticker
These instructions
List of illustrations:
Wiring harness N1L_ST18; X1-1
29.04.2011 Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
Designation
Payment system installation kit BSK 18 for PW 6107, PW 6137,
PW 6167, PW 6207
M.-Nr. 09082680